TECHNICAL DATA
| Superset NT | ||
| Minimum working width (finished section) | mm | 25 [15 option] |
| Maximum working width (finished section)
* with 145 mm tool diameter on left vertical spindle |
mm | 240* [260 option] |
| Minimum working height (finished section) | mm | 6 |
| Maximum working height (finished section)
* with 145 mm tool diameter on top horizontal spindle |
mm | 120* [200 option] |
| Minimum length of single work-piece | mm | 620 [450 option] |
| Feed speed managed by inverter | m/min | 5 ÷ 25 [6 ÷ 40 option] |
| Feed motor power | kW (Hp) | 2,2 (3)
[4 (5,5) option
5,5 (7,5) opt. for 32/32U] |
| Standard motors power | kW (Hp) | 4 (5,5) |
| Spindles rotating speed | rpm | 6.000 [8.500 option] |
| Diameter of tool-holder spindles | mm | 40
[50 option 1″13/16 option] |
| Vertical spindles length | mm | 140** [180 option] |
| Horizontal spindles length | mm | 250** |
| Universal spindle length (option) | mm | 240** |
| Axial adjustment of vertical spindles compared to the table | mm | 80 [75 with HSK 85S] |
| Axial adjustment of horizontal spindles compared to the right fence | mm | 45 |
| Min.-max. diameter of surface planer tool | mm | 120 – 140** |
| Min.-max. diameter of profiling tool
* 40 mm min. and max. tool diameter difference, for vertical spindles, under worktable |
mm | 100 – 200* ** [90 – 200 with HSK 85S] |
| Profiling capacity on 2nd bottom horizontal spindle with 200 mm tool diameter | mm | 15 [50 option] |
| Spindle cylinder diameter | mm | 120 |
| Feed rollers diameter | mm | 140 |
| Length of infeed table (from the planer axis) | mm | 2.500 |
| Worktable width | mm | 230 |
| Rapid adjustment of worktable and infeed fence | mm | 10 |
| Max. stock removal for each side of the work-piece (down-side, up-side, right-side and left-side) |
mm | 10 |
download pdf specifications
